Carrel Electrade - T-TPR Transducer


Home	Contact

Electrical Transducers

Data sheet

T-TPR Tap Position Transducer

The T-TPR resistance type tap position transducer converts a potentiometric voltage into a load independent dc current or voltage signal.
There is galvanic isolation between the input, output and the auxiliary supply circuits.

Basic Specifications:
Input	DC voltage across a resistance potentiometer
	Excitation voltage	: 1.25V to 10V dc
	Accurate range	: 0 - 100%
	Input resistance	: >1MΩ
Output	Load independent dc current or voltage
	Standard outputs	: 0 - 10mA dc <1500Ω load
	(others on request)	: 0 - 20mA dc <750Ω load
		: 4 - 20mA dc <750Ω load
		: 0 - 5V dc >2kΩ load
		: 0 - 10V dc >2kΩ load
Accuracy		: Class 1 to IEC 60688
Power Supply		: 24V, 110V, 230/240V, 400/415V ac ±20%, 2VA
		: 24V dc ±20% or 110V/125V dc (88V-138V), 2W
Isolation	Galvanic isolation between input, output circuit and auxiliary supply
	Test voltage	: 4kV 50Hz ac for 1 minute
Temperature	Operating	: -10°C to +20°C to +50°C
EMC Compliance		: AS/NZS 61000.6.3:2012

Dimensions

Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.