Carrel Electrade - T-CDL Transducer


Home	Contact

Electrical Transducers

Model T-CDL

T-CDL data sheet.

T-CDL Loop Powered DC Signal Isolator

The T-CDL dc signal isolator converts a 4-20mA dc current or a dc voltage into a load independent dc current or voltage signal.
The output signal is powered from a dc loop (4-20mA version) or a dc supply (0-5V, 0-10V version).
Input and Output are galvanically isolated from each other.

Basic Specifications:
Input	Unipolar dc current or voltage
	Standard inputs	: 4 - 20mA dc
	(other on request)	: 8 - 16V dc
		: 16 - 32V dc
		: 70 - 150V dc
	Burden	: 5V drop for 4-20mA input, <5mA for voltage inputs
Output	Load independent dc current or voltage
	Standard outputs	: 4 - 20mA dc <750Ω load (2 wire loop)
		: 0 - 5V dc >2kΩ load (3 wires)
		: 0 - 10V dc >2kΩ load (3 wires)
Accuracy		: Class 0.5 to IEC 60688
	Range	: 0 to 120% of nominal input
Isolation	Galvanic isolation between input and output
	Test voltage	: 4kV 50Hz ac for 1 minute
Temperature	Operating	: -10°C to +20°C to +50°C
EMC Compliance		: AS/NZS 61000.6.3:2012

Dimensions

Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.