Carrel Electrade - LP-KWC/M Kilowatt Hour Meter


Home	Contact

Electrical Transducers

Model LP-KWC, LP-KWM

Data sheet.

LP-KWC Series Kilowatt Hour Meters
with optional RS485 MODBUS^® RTU LP-KWM

The LP-KWC/M series of electronic kWh meters has variations for single phase, two phase, three phase 3 or 4 wire, balanced or unbalanced systems.
In addition to the LCD display there is a pulse output for use with data loggers or similar electronic recorders and controllers.
The compact circuitry employed allows these meters to be housed in a standard 3M or 4M DIN rail mount case.

Basic Specifications:
Inputs	AC current and voltage, single phase, two phase, 3 phase 3 or 4 wire, balanced or unbalanced load
	Current	: 5A (1A optional) CTs, or CT10-3 miniature CT up to 80A
		: User selectable CT ratio, 40/5A up to 5000/5A
	Voltage	: 3 x 230V Ph-N (others on request)
	Frequency	: 50Hz, 60Hz
Outputs		: Integral 7 digit LCD display with 0.1 or 1 kWh units
		: NPN open collector optocoupler or dry contact relay
MODBUS^® option		: Opto coupler isolated RS485 MODBUS^® RTU
Accuracy		: Class 1 to IEC 61036
Isolation	Galvanic isolation between inputs and outputs
	Current inputs	: 4kV 50Hz ac for 1 minute
	Voltage inputs	: 2kV 50Hz ac for 1 minute
Temperature	Operating	: 0°C to +23°C to +60°C
EMC Compliance		: AS/NZS 61000.6.3:2012

Dimensions	Single Phase Meters	Three Phase Meters

Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.