logo
Home page Contact
Home Contact
Electrical Transducers
LP-CDD MODBUS Output DC Signal Converter & Isolator

LP-CDD MODBUS® Output DC Signal Converter & Isolator

The LP-CDD converts a unipolar dc voltage or current input into a proportional digital output which is accessed via a serial data bus using MODBUS® RTU protocol.
There is galvanic isolation between the input, output and the auxiliary supply.


Basic Specifications:
InputPt100 platinum resistance sensor Class A
Three lead with compensation or two lead sensor without compensation
Standard range: 0 - 400°C (others on request)
Sensing current: 5mA dc
OutputMODBUS® protocol on RS485 twisted pair
: 12 bit resolution in 16 bit unsigned integer
: 0 - 400°C = 0 - 4000, lsb = 0.1°C
Baud rate: 9.6/19.2 kBaud
Accuracy: Class B to DIN 43760 ±((0.15 + 0.002t)°C
Range: 0 - 100%
Power Supply: 24V, 110V, 230/240V ac ±20%, 1.5VA
: 24V dc ±20% or 110V/125V dc (88V-138V), 2W
IsolationGalvanic isolation between input, output circuit and auxiliary supply
Test voltage: 2kV 50Hz ac for 1 minute
TemperatureOperating: 0°C to +23°C to +60°C
EMC Compliance: AS/NZS 61000.6.3:2012
Dimensions
LP-4M
NZ flag
Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.